Wedge Anchor Zinc 3/8 X 7 (Pack of 50)

Wedge Anchor Zinc 3/8 X 7 (Pack of 50) Reviews

Other Picture

Wedge Anchor Zinc 3/8 X 7 (Pack of 50)

Visit Store Now !!

Detail Products

Detail Reviews

Wallclaw Anchors LLC PCK-WC100-YS Wallclaw Anchor

Wallclaw Anchors LLC PCK-WC100-YS Wallclaw Anchor Reviews

Other Picture

Hammer In drywall anchors. Hangs up to 90 lb. Installs in seconds, no drilling. For hanging kitchen or bathroom accessories, wall decor, pictures, etc. No. PCK WC4 YS: 4 pack No. PCK WC10 YS: 10 pack No. PCK WC25 YS: 25 pack No. PCK WC50 YS: 50 pack No. PCK WC100 YS: 100 pack

Visit Store Now !!

Detail Products

Detail Reviews

Plastic Anchors with Screws, 8-10 x 7/8"

Plastic Anchors with Screws, 8-10 x 7/8" Reviews

Other Picture

Plastic Anchors with Screws, 8-10 x 7/8" Feature

• Plastic conical anchors
• With screws
• Size 8-10X7/8"

Plastic Anchors w/ Screws, 8-10 x 7/8". 60-8 x 1 Combo PN SMS. 60-Conical Plastic anchors. Drill Size: 3/16"

Visit Store Now !!

Detail Products

Detail Reviews

IMPERIAL 11343 STEEL NAIL HAMMER DRIVE ANCHOR 1/4x2

IMPERIAL 11343 STEEL NAIL HAMMER DRIVE ANCHOR 1/4x2 Reviews

Other Picture

IMPERIAL 11343 STEEL NAIL HAMMER DRIVE ANCHOR 1/4x2 Feature

• "IMPERIAL" DRIVE ANCHOR
• Diameter: 1/4
• Length: 2"
• Hammer Drive Anchor
• Box of 50.

"IMPERIAL" DRIVE ANCHOR Diameter: 1/4 Length: 2" Hammer Drive Anchor Steel nail/zinc alloy anchor. Box of 50.

Visit Store Now !!

Detail Products

Detail Reviews

Hillman Fasteners 25Pk1/2X3-3/4Wdg Anchor 371938 Wedge Anchors

Hillman Fasteners 25Pk1/2X3-3/4Wdg Anchor 371938 Wedge Anchors Reviews

Other Picture

Hillman Fasteners 25Pk1/2X3-3/4Wdg Anchor 371938 Wedge Anchors Feature

• Hillman #371938 25PK1/2x3-3/4WDG Anchor
• HILLMAN FASTENERS

Rawl, 25 Pack, 1/2 x 3-3/4', Power Stud Wedge Anchor, Carbon Steel/Zinc, Thread Length 2-1/4', Minimum Embedment 2-1/4', Ultimate Tension 4,000 PSI 6,625 LB, Ultimate Shear 4,000 PSI 7,150 LB.

Visit Store Now !!

Detail Products

Detail Reviews

Hillman Fastener Corp 372057 Hammer Drive Anchor

Hillman Fastener Corp 372057 Hammer Drive Anchor Reviews

Other Picture

Hillman Fastener Corp 372057 Hammer Drive Anchor Feature

• Hillman #372057 100PK1/4x1-1/4DR Anchor
• HILLMAN FASTENERS

Die cast zinc. Steel pin. 100 pieces per pack. No. 372051: 3 16 x 7 8 No. 372053: 1 4 x 3 4 No. 372054: 1 4 x 1 No. 372057: 1 4 x 1 1 4 No. 372060: 1 4 x 1 1 2 No. 372063: 1 4 x 2

Visit Store Now !!

Detail Products

Detail Reviews

2 Pack Simpson Strong Tie STB62812 Strong-Bolt 5/8" x 8-1/2" Wedge Anchor 20 per Box

2 Pack Simpson Strong Tie STB62812 Strong-Bolt 5/8" x 8-1/2" Wedge Anchor 20 per Box Reviews

Other Picture

2 Pack Simpson Strong Tie STB62812 Strong-Bolt 5/8" x 8-1/2" Wedge Anchor 20 per Box Feature

• 5/8" x 8-1/2" Wedge Anchor
• 20 per Box
• 6" Thread Length
• Use with 5/8" Diameter Drill Bit
• Installs like a standard wedge anchor

The Strong-Bolt is a wedge anchor specifically designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. Rigorously tested according to the latest industry-wide criteria, the Strong-Bolt anchor is proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or "follow-up" expansion if a crack forms and intersects the anchor location. This significantly increases the ability of the Strong-Bolt wedge anchor to carry load if the hole opened slightly due to a crack. The Strong-Bolt anchor sets like a standard wedge anchor and is available in Imperial fractional sizes. FEATURES: Tri-segmented clip: Each segment is able to adjust independently increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Allows the clip to undercut into the concrete increasing follow-up expansion should a crack occur. 316 stainless steel clip: In addition to superior corrosion resistance, a stainless steel clip offers better "memory". This memory contributes to the anchor's performance should the hole size increase due to a crack. Imperial fractional sized anchor: Fits most fixtures and installs with common drill bits sizes and tools. No need to buy additional tools to install a metric anchor and no special couplers needed. Installs like a standard wedge anchor: No complicated installation procedure. No need for special bits or installation tools. "No equal" sign stamped into the head: Easy identifi cation after installation.

Visit Store Now !!

Detail Products

Detail Reviews

IMPERIAL 11272 "TAPCON" SLOTTED HEX HEAD MASONRY ANCHOR 3/16x2-1/4"

IMPERIAL 11272 "TAPCON" SLOTTED HEX HEAD MASONRY ANCHOR 3/16x2-1/4" Reviews

Other Picture

IMPERIAL 11272 "TAPCON" SLOTTED HEX HEAD MASONRY ANCHOR 3/16x2-1/4" Feature

• "TAPCON" MASONRY ANCHOR
• Fixture Thickness: 3/4-1-1/4
• Size: 3/16 x 2-1/4 Slotted Hex Washer Head (1/4")
• No need to pre-spot holes, and no inserts are required.
• Box of 100

"TAPCON" MASONRY ANCHOR Imperial Tapcon® Slotted Hex Head Masonry Anchor. The original blue masonry anchor that cuts threads into concrete, brick, or hollow block. Fast installation; drill a hole, drive an anchor. Available in 3/16 and 1/4 diameters and in lengths 1-1/4 to 4". No need to pre-spot holes, and no inserts are required. Reversible and removable. Can be installed close to an edge. One drill bit included with each box of 100. Style: Original notched Hi-Lo thread, Nail point type, Blue Climaseal finish. Size: 3/16 x 2-1/4 Slotted Hex Washer Head (1/4") Replaces small diameter expansion anchors, plugs, and screws in light to medium duty applications. Fixture Thickness: 3/4-1-1/4 Box of 100 Applications: Electrical junction boxes and conduit clips to masonry. Wood headers and furring strips to masonry. HVAC strapping to masonry. Plywood backer boards to masonry. Exterior insulation systems to masonry.

Visit Store Now !!

Detail Products

Detail Reviews

3/8X2-3/4 WEDGE ANCHOR [Misc.]

3/8X2-3/4 WEDGE ANCHOR [Misc.] Reviews

Other Picture

3/8X2-3/4 WEDGE ANCHOR [Misc.] Feature

• Min imbed- 1/4"=1-1/8", 3/8" =1-3/4", 1/2"= 2-14", 5/8"= 2-7/8",3/4" = 3-3/8".
• Bit size = rawl stud dia.
• Zinc plated steel
• Boxed
• 3/8" x 2-3/4"

Rawl Power-Stud. Steel/zinc-plated. For use in concrete, stone, brick, and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. No. 370980: 1/4" x 2-1/4", 40-piece No. 370981: 1/4" x 3-1/4", 30-piece No. 370982: 3/8" x 2-1/4", 25-piece No. 370983: 3/8" x 2-3/4", 25-piece No. 370984: 3/8" x 3", 25-piece No. 370985: 3/8" x 3-3/4", 25-piece No. 370986: 3/8" x 5", 10-piece No. 370987: 1/2" x 2-3/4", 12-piece No. 370988: 1/2" x 3-3/4", 12-piece No. 370989: 1/2" x 4-1/4", 10-piece

Visit Store Now !!

Detail Products

Detail Reviews

3/4 X 4 3/4 Wedge Anchors / Stainless Steel / Nut and Washer Included / ICC Compliant (ICBO) / 20 Pc. Carton

3/4 X 4 3/4 Wedge Anchors / Stainless Steel / Nut and Washer Included / ICC Compliant (ICBO) / 20 Pc. Carton Reviews

Other Picture

3/4 X 4 3/4 Wedge Anchors / Stainless Steel / Nut and Washer Included / ICC Compliant (ICBO) / 20 Pc. Carton Feature

• 3/4 X 4 3/4
• Stainless Steel
• Nut and Washer included
• ICC Compliant (ICBO)

3/4 X 4 3/4 Wedge Anchors / Stainless Steel / Nut and Washer Included / ICC Compliant (ICBO)

Visit Store Now !!

Detail Products

Detail Reviews

Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box

Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box Reviews

Other Picture

Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box Feature

• 1/2" x 4"
• Use with 1/2" Diameter Drill Bit
• Use with 3/4" Wrench or Socket
• 20 per Box
• Zinc plated, Carbon steel, heat treated

The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.

Visit Store Now !!

Detail Products

Detail Reviews

4 Pack Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box

4 Pack Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box Reviews

Other Picture

4 Pack Simpson Strong Tie THD50400H 1/2" x 4" Titen HD Heavy Duty Screw Anchor for Concrete / Masonry 20 per Box Feature

• 1/2" x 4"
• Use with 1/2" Diameter Drill Bit
• Use with 3/4" Wrench or Socket
• 20 per Box
• Zinc plated, Carbon steel, heat treated

The Titen HD anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.

Visit Store Now !!

Detail Products

Detail Reviews

3/8 X 3 1/4 Wedge Anchors / Steel / Zinc / Nut and Washer Included / ICC Compliant (ICBO) / 50 Pc. Carton

3/8 X 3 1/4 Wedge Anchors / Steel / Zinc / Nut and Washer Included / ICC Compliant (ICBO) / 50 Pc. Carton Reviews

Other Picture

3/8 X 3 1/4 Wedge Anchors / Steel / Zinc / Nut and Washer Included / ICC Compliant (ICBO) / 50 Pc. Carton Feature

• 3/8 X 3 1/4
• Steel with Zinc Finish
• Nut and Washer included
• ICC Compliant (ICBO)

3/8 X 3 1/4 Wedge Anchors / Steel / Zinc / Nut and Washer Included / ICC Compliant (ICBO)

Visit Store Now !!

Detail Products

Detail Reviews