Hillman Fasteners Med Plate Hanger/Tips 122052 Plate Hangers

Hillman Fasteners Med Plate Hanger/Tips 122052 Plate Hangers Reviews

Other Picture

Hillman Fasteners Med Plate Hanger/Tips 122052 Plate Hangers Feature

• HILLMAN FASTENERS
• 8" To 11"
• Medium Plate Hanger
• Soft Tips & Hanger
• Carded

8' To 11', Medium Plate Hanger, With Soft Tips & Hanger, Carded.

Visit Store Now !!

Detail Products

Detail Reviews

Wej-It Fastening System 5Pk 3/4X6-1/4Wdg Anchor Zat3461 Wedge Anchors

Wej-It Fastening System 5Pk 3/4X6-1/4Wdg Anchor Zat3461 Wedge Anchors Reviews

Other Picture

Wej-It Fastening System 5Pk 3/4X6-1/4Wdg Anchor Zat3461 Wedge Anchors Feature

• Wej-It Fastening System #ZAT3461 5PK 3/4x6-1/4WDG Anchor
• WEJ-IT FASTENING SYSTEM

5 Pack 3/4' x 6-1/4', Wedge Type, Heavy Duty Concrete Stud Anchor, Comes Complete With Nuts & Washers, Bolt Size Is Hole Size.

Visit Store Now !!

Detail Products

Detail Reviews

20 Pack National N172-619 12" x 14" Utility Shelf Bracket - Gray

20 Pack National N172-619 12" x 14" Utility Shelf Bracket - Gray Reviews

Other Picture

20 Pack National N172-619 12" x 14" Utility Shelf Bracket - Gray Feature

• Quantity: (1) Piece
• Type: Utility Shelf Brackets
• Length (Inch)14
• Width (Inch):12
• Finish/Coating: Gray

Utility Shelf Brackets Type: Utility Shelf Brackets Length:14 Width:12 Finish/Coating: Gray

Visit Store Now !!

Detail Products

Detail Reviews

Simpson Strong Tie STB50334 Strong-Bolt 1/2" x 3-3/4" Wedge Anchor 25 per Box

Simpson Strong Tie STB50334 Strong-Bolt 1/2" x 3-3/4" Wedge Anchor 25 per Box Reviews

Other Picture

Simpson Strong Tie STB50334 Strong-Bolt 1/2" x 3-3/4" Wedge Anchor 25 per Box Feature

• 1/2" x 3-3/4" Wedge Anchor
• 25 per Box
• 2-5/16" Thread Length
• Use with 1/2" Diameter Drill Bit
• Installs like a standard wedge anchor

The Strong-Bolt is a wedge anchor specifically designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. Rigorously tested according to the latest industry-wide criteria, the Strong-Bolt anchor is proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or "follow-up" expansion if a crack forms and intersects the anchor location. This significantly increases the ability of the Strong-Bolt wedge anchor to carry load if the hole opened slightly due to a crack. The Strong-Bolt anchor sets like a standard wedge anchor and is available in Imperial fractional sizes. FEATURES: Tri-segmented clip: Each segment is able to adjust independently increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Allows the clip to undercut into the concrete increasing follow-up expansion should a crack occur. 316 stainless steel clip: In addition to superior corrosion resistance, a stainless steel clip offers better "memory". This memory contributes to the anchor's performance should the hole size increase due to a crack. Imperial fractional sized anchor: Fits most fixtures and installs with common drill bits sizes and tools. No need to buy additional tools to install a metric anchor and no special couplers needed. Installs like a standard wedge anchor: No complicated installation procedure. No need for special bits or installation tools. "No equal" sign stamped into the head: Easy identifi cation after installation.

Visit Store Now !!

Detail Products

Detail Reviews

4 Pack Simpson Strong Tie STB50414 Strong-Bolt 1/2" x 4-1/4" Wedge Anchor 25 per Box

4 Pack Simpson Strong Tie STB50414 Strong-Bolt 1/2" x 4-1/4" Wedge Anchor 25 per Box Reviews

Other Picture

4 Pack Simpson Strong Tie STB50414 Strong-Bolt 1/2" x 4-1/4" Wedge Anchor 25 per Box Feature

• 1/2" x 4-1/4" Wedge Anchor
• 25 per Box
• 2-13/16" Thread Length
• Use with 1/2" Diameter Drill Bit
• Installs like a standard wedge anchor

The Strong-Bolt is a wedge anchor specifically designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors. Rigorously tested according to the latest industry-wide criteria, the Strong-Bolt anchor is proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or "follow-up" expansion if a crack forms and intersects the anchor location. This significantly increases the ability of the Strong-Bolt wedge anchor to carry load if the hole opened slightly due to a crack. The Strong-Bolt anchor sets like a standard wedge anchor and is available in Imperial fractional sizes. FEATURES: Tri-segmented clip: Each segment is able to adjust independently increasing follow-up expansion should the hole increase in size as a result of a crack. Dual embossments on each clip segment: Allows the clip to undercut into the concrete increasing follow-up expansion should a crack occur. 316 stainless steel clip: In addition to superior corrosion resistance, a stainless steel clip offers better "memory". This memory contributes to the anchor's performance should the hole size increase due to a crack. Imperial fractional sized anchor: Fits most fixtures and installs with common drill bits sizes and tools. No need to buy additional tools to install a metric anchor and no special couplers needed. Installs like a standard wedge anchor: No complicated installation procedure. No need for special bits or installation tools. "No equal" sign stamped into the head: Easy identifi cation after installation.

Visit Store Now !!

Detail Products

Detail Reviews

8-10 Screw Size - Nylon Screw Anchor (100 count)

8-10 Screw Size - Nylon Screw Anchor (100 count) Reviews

Other Picture

Drill Size: 3/16"

Visit Store Now !!

Detail Products

Detail Reviews

Itw Brands 100Pk.300X2-1/2 Ram Pin 9167 Pins Masonry Striker

Itw Brands 100Pk.300X2-1/2 Ram Pin 9167 Pins Masonry Striker Reviews

Other Picture

Itw Brands 100Pk.300X2-1/2 Ram Pin 9167 Pins Masonry Striker Feature

• Designed For Use In Concrete And Structural Steel Applications
• 0.145" Shank Diameter
• 0.300" Head Diameter
• 100 per Box

Ramset, 100 Pack, .300' x 2-1/2', #1516 Ramguard Drive Pin.

Visit Store Now !!

Detail Products

Detail Reviews

Steel Zinc Plate Ultrawedge Anchor 1-8 " Diameter x 12" Length (Pack of 5)

Steel Zinc Plate Ultrawedge Anchor 1-8 " Diameter x 12" Length (Pack of 5) Reviews

Other Picture

Zinc plated Steel Ultrawedge Stud Anchors from Porteous Inc. leave a threaded stud in concrete. Drive through a fixture, into a hole, and tighten the nut. Stud is chamfered to prevent thread damage during installation. Not reusable.

Visit Store Now !!

Detail Products

Detail Reviews

ITW Brands 24365 Tapcon Phillips Concrete Anchor

ITW Brands 24365 Tapcon Phillips Concrete Anchor Reviews

Other Picture

ITW Brands 24365 Tapcon Phillips Concrete Anchor Feature

• Itw Brands #24365 75PK 3/16x2-3/4 Anchor
• ITW BRANDS

No inserts required. Drill a hole and drive an anchor. Replaces small diameter expansion anchors, plugs, and screws in light to medium duty applications. Reversible and removable. thread design increases pullout values and lowers installation torque. Extra corrosion resistance. Can be installed close to the edge of concrete. Recommended for use in pressure treated lumber. Phillips head. Available in 8 and 75 piece box. No. 24150: 3 16'' x 1 1 4'', 8 piece No. 24350: 3 16'' x 1 1 4'', 75 piece No. 24155: 3 16'' x 1 3 4'', 8 piece No. 24355: 3 16'' x 1 3 4'', 75 piece No. 24165: 3 16'' x 2 3 4'', 8 piece No. 24365: 3 16'' x 2 3 4'', 75 piece No. 24175: 1 4'' x 1 3 4'', 8 piece No. 24375: 1 4'' x 1 3 4'', 75 piece No. 24185: 1 4'' x 2 3 4'', 8 piece No. 24385: 1 4'' x 2 3 4'', 75 piece

Visit Store Now !!

Detail Products

Detail Reviews

Steel Zinc Plated Sleeve Anchor Acorn Head 1/4-20" Diameter x 7/8" Length (Pack of 100)

Steel Zinc Plated Sleeve Anchor Acorn Head 1/4-20" Diameter x 7/8" Length (Pack of 100) Reviews

Other Picture

Sleeve Anchors provide a large bearing surface, you can count on these anchors for secure, permanent holding power. All provide a threaded stud when installed. Use them to hold steel, aluminum, wood panels, doors, framing, and shelving to concrete. To install, drive the anchor through the fixture and into a drilled hole, then tighten the bolt to expand the end. Anchors meet GSA specifications. Ultimate tension and shear strength are based on tests in 4,000 psi concrete. Not removable.

Visit Store Now !!

Detail Products

Detail Reviews

Anchor Brand 300M Anchor Medium Backcap (2 EA)

Anchor Brand 300M Anchor Medium Backcap (2 EA) Reviews

Other Picture

- Used on Torch(es)=17, 18, 26, Length=2 1/4 in, Type=Medium

Visit Store Now !!

Detail Products

Detail Reviews

Red Head WS-58100 Trubolt Carbon Steel Wedge 5/8-Inch by 10-Inch Anchor (10 per Box)

Red Head WS-58100 Trubolt Carbon Steel Wedge 5/8-Inch by 10-Inch Anchor (10 per Box) Reviews

Other Picture

Red Head WS-58100 Trubolt Carbon Steel Wedge 5/8-Inch by 10-Inch Anchor (10 per Box) Feature

• Used for Structural Columns, Machinery, Equipment and Non-Corrosive Environments
• Stainless Steel Expansion Clip
• Exposed End of the Anchor is Stamped to Identify Anchor Length
• Anchor Diameter Equals Hole Diameter
• Non-Bottom Bearing

Red Head Trubolt Carbon Steel Wedge 5/8 X 10 Inch Anchor is used for structural columns, machinery, equipment, and non-corrosive environments. Trubolt Wedge anchors feature a stainless steel expansion clip, high-strength threaded stud body, nut and washer. The anchor bodies are made of plated carbon steel, and the expansion clip consists of a split cylindrical ring with undercutting grooves. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. The anchor diameter equals hole diameter, and they are non bottom-bearing, so they may be used in hole depth exceeding anchor length. Red Head anchors can be installed through the work fixture, eliminating hole spotting Inspectable torque values, indicating proper installation. Specs: Thread Length (inch) -- 5-3/4; Anchor Diameter and Drill Bit Diameter (inches) -- 5/8 - 11; Overall Length (inch) -- 10; Max. Thickness of Materials to be Fastened (inch) -- 6-5/8; Quantity per Box -- 10.

Visit Store Now !!

Detail Products

Detail Reviews

Hillman Fastener Corp 371960 Wedge Anchor

Hillman Fastener Corp 371960 Wedge Anchor Reviews

Other Picture

Hillman Fastener Corp 371960 Wedge Anchor Feature

• Bit size = rawl stud dia.
• Zinc plated steel
• Boxed

Rawl Power Stud. Steel zinc plated. No. 371942: 1 2 x 5 1 2, 25 piece No. 371944: 1 2 x 7, 25 piece No. 371946: 5 8 x 3 1 2, 10 piece No. 371947: 5 8 x 4 1 2, 10 piece No. 371948: 5 8 x 5, 10 piece No. 371950: 5 8 x 6, 10 piece No. 371952: 5 8 x 7, 10 pie

Visit Store Now !!

Detail Products

Detail Reviews